Insert hanging wire through the holes in the back and knot off in the front. Step 6) Drill two holes through the wood near the top outer corners of the wood piece with the 1/4″ drill bit. Then change out the drill to the screw bit and drill the 3/8″ screw through the hole in the can and into the wood to secure the can. Step 5) Doing this step one can at a time, line up the can on the wood and drill a hole through the can and just barely through the wood with the 1/8″ drill bit. Mark the placement onto the wood with pencil. Step 4) Line up tin cans on the scrap wood in the shape of a Christmas tree, making sure to space out the rows of cans so that it appears more like a Christmas tree than if the cans are all touching.
![.22lr tunacan .22lr tunacan](https://i5.walmartimages.com/asr/f6eb7fac-7574-45de-9edc-e65819ca016e.284e39f0df0aff2a3599e43cda8826da.jpeg)
Create a Christmas Tree Layout with the Tuna Cans Step 3) Cut and sand a piece of scrap wood to size at approximately 18″ x 24″. I recommend painting them with a metallic spray paint because it really makes the light from the flameless tea lights glow and reflect. Optionally, you can skip the faux rusting step and just paint them silver (or some metallic color).Īlternatively, you can skip the painting step and keep the cans unpainted. Gently sand to create a slightly rusted tin can look.then spray paint the cans with silver paint and let dry.Spray paint the tin cans with a combination of the dark brown and orange, let dry.Step 2) To create a faux rust look on the tuna cans: If I had used tuna, I would have saved in the same way to make several of these tuna recipes for later. Tip #2: I froze the chicken in freezer safe bags to use for making several of these chicken recipes later. Tip #1: After cleaning, you can also drop them in a baking soda/vinegar/ hot water soak for 30 minutes to neutralize the odors. Step 1) Empty 10 cans of chicken or tuna.
#.22lr tunacan how to
How to make a lighted tuna can Christmas tree
![.22lr tunacan .22lr tunacan](https://xodseb.com/wp-content/uploads/2018/04/9689.jpg)
Spray paint in colors: dark brown, orange and top coat with silver ( optional) solid electrical wire because it’s coated red) Supplies Need to Make a Tuna Can Christmas Treeġ1 large and emptied tuna or chicken tin cansġ1 flameless tealights (flickering if possible)ġ piece of 1/2″ thick scrap wood, approx size 18″ x 24″ġ/8″ drill bit to drill holes in tin cans for screw attachmentġ/4″ drill bit to drill holes in wood for wire hanging attachmentģ′ of sturdy wire (I used 14 ga. Speaking of cheating, I actually used canned chicken for this lighted tuna can Christmas tree, because I’m not the biggest tuna fish consumer, so I hope you will forgive me for that little white lie. Wall Mounted and Lighted Tuna Can Christmas Treeīut that’s the saying that kept coming to mind as I was making this lighted tuna can Christmas tree.īy the way, who remembers the name of the band that had a similar album title back in the 80’s?īless your heart if you didn’t grow up in the 80’s…but that’s a whole other conversation. You can tune a piano, but you can’t tuna Christmas tree!